Using The Autolink Feature; Main Screen - 3Com ETHERLINK III LAN PC CARD User Manual

Using the AutoLink Feature

If you are not using Card Services and are using a memory
manager, you must exclude memory for the memory
manager before you configure the PC Card. For more
information about Card Services, see Appendix A.
Delete references to any other network adapter in the
AUTOEXEC.BAT file and in the NET.CFG file prior to executing
AutoLink. You can delete the NET.CFG file, and a new one will
be copied over.
Follow these steps to use the AutoLink feature:
1 Place the EtherDisk diskette in a diskette drive on your PC.
Make that drive the active drive and start the installation
program. For example, type the following:
A: Install [Enter]
The main screen appears, as shown in Figure 3-1.
®
AutoLink
Figure 3-1 Main Screen
®
EtherLink III LAN PC Card
Please select the appropriate network operating system from the
list below.
Network Operating System (NOS)
Novell NetWare DOS ODI Client
Windows for Workgroups
Windows 95
Artisoft LANtastic
Banyan VINES
DEC PATHWORKS
Manual
Using the AutoLink Feature
Upgrade
Driver Tools
3-3
Exit
Help