3C589C Pc Card Software; 3C589C Pc Card Installation Options; Netware Driver Installation - 3Com ETHERLINK III LAN PC CARD User Manual

3C589C PC Card Software

The 3C589C PC Card software copies the 3C589C files to the
PC, configures the PC Card, and runs tests on the PC Card.
The EtherDisk diskette contains a README.TXT file that
describes important information that became available after
the guide was printed.

3C589C PC Card Installation Options

The software on the EtherDisk diskette provides two
installation options for the 3C589C PC Card:
AutoLink installer for NetWare DOS ODI clients and NetWare
4.0 installer for NetWare WIndows clients
OEM installers for NDIS network operating systems
These options are described in the following sections. Ask
your MIS representative or system administrator which type
of network operating system you are connecting to.

NetWare Driver Installation

You can install the NetWare driver with the AutoLink
program or the Network 4.0 installer.
The AutoLink feature automatically configures your PC as a
NetWare DOS ODI client. The AutoLink program:
Configures the 3C589C PC Card
Copies the NetWare client files to the PC
Modifies PC startup files
After the 2- to 3-minute AutoLink installation, you can reboot
your PC and log into a NetWare server. For more information
about the AutoLink feature, see Chapter 3, Installing the
NetWare Driver.
3C589C PC Card Software 1-3