Using The Netware 4.X Installer - 3Com ETHERLINK III LAN PC CARD User Manual

3-4 C
HAPTER
2 Click AutoLink.
A screen appears, asking if you want to use AutoLink or
display the NetWare 4.X installation instructions.
3 Click AutoLink to proceed with the AutoLink installation.
The software copies the NetWare DOS ODI driver
(3C589.COM) and associated files to your PC.
After 2–3 minutes, a message appears, stating that the
AutoLink program has completed the configuration.
4 Remove the EtherDisk diskette and reboot your PC.
The log-in prompt for a NetWare server appears.
5 Log in to the NetWare server using your user ID and
password provided by your network administrator.
The 3C589C PC Card is now a NetWare DOS ODI client.
Installation and configuration are complete.
If you have problems, you can display the AutoLink.Log file,
which contains a log of all of the events that occurred during
the AutoLink installation and configuration process. To
display the AutoLink.Log file, type the following:
C:\ Type AutoLink.Log | More

Using the NetWare 4.X Installer

This procedure describes how to install the 3Com NetWare
driver using the NetWare 4.X installer. Using the NetWare
installer adds Windows client support, provides NetWare User
Tools for printing, and allows you to log in and out using
Windows.
1 Insert the WSDOS1 NetWare diskette in your floppy drive.
2 Type:
Install
3 Accept the defaults for the first four options.
3: I N
NSTALLING THE
W D
ET ARE RIVER