Diagnostic Program Screen - 3Com ETHERLINK III LAN PC CARD User Manual

6-4 C 6: T
HAPTER
4 Click Diagnostic.
The Diagnostic Program screen appears, as shown in
Figure 6-3, with all tests selected to run.
EtherLink
®
Config
Return
Main
Figure 6-3 Diagnostic Program Screen
5 Click the check box next to any test that you do not want
to run.
6 In the Repeat Times box, enter the number of times you
want the test to run.
If you want to run the tests continuously, click Continuous
(and deselect the Halt on Error box if it is selected).
7 To start a test, click Start.
8 To stop a test, click Stop.
Click Help for tips on what to do if a test fails. For more
information, see "Troubleshooting Tips" later in this chapter.
ROUBLESHOOTING
®
III LAN PC Card
Continuous Repeat
0 Untested
0 Untested
0 Untested
0 Untested
0 Untested
0 Untested
0 Untested
File Start
10
times
Register Access Test
EEPROM Vital Data Test
EEPROM Configurable Data
FIFO Built-in Self-test
FIFO Loopback Test
Interrupt Test
Ethernet Core Loopback Test
Statistics
Echo
Halt on error
Exit
Help