Os/2 Lan Server Installation - 3Com ETHERLINK III LAN PC CARD User Manual

4-8 C 4: I
HAPTER
10 Reboot the PC.
This completes the installation process for IBM DOS LAN
Services Install v4.0 for DOS.

OS/2 LAN Server Installation

This procedure describes how to install the 3Com NDIS driver
for LAN Server 4.0. OS/2 must be already installed on your
computer. To install the NDIS driver for the 3C589C PC Card,
follow these steps:
1 Open an OS/2 prompt.
2 Insert the LAN Server MPTS (Multi-Protocol Transport
Services) Disk 1 diskette in your diskette drive.
3 Make that drive your current drive. Type:
A: [Enter]
4 Type:
Install [Enter]
5 Click OK.
6 Click Install.
7 Select a target drive and then click OK.
The default drive is C.
8 Insert the Disk 2 diskette when prompted and click OK.
9 Click OK when the MPTS installation is complete.
10 Click Configure.
11 Select LAN Adapters and Protocols and then click Configure.
12 Select Other Adapters and then click OK.
13 Insert the EtherDisk diskette in the diskette drive and
enter the drive letter and path to the 3Com NDIS drivers.
NDIS D
NSTALLING THE RIVER