Microsoft Lan Manager - 3Com ETHERLINK III LAN PC CARD User Manual

4-6 C
HAPTER

Microsoft LAN Manager

The EtherDisk diskette contains a subdirectory structure and
files that make it an OEM import disk for the LAN Manager
installer. Use the import function of the LAN Manager installer
to capture the NDIS driver from the EtherDisk diskette. Be sure
to save the new configuration before exiting the installer.
To install the 3Com NDIS driver for LAN Manager version 2.2
for DOS, follow these instructions:
1 Begin the MS-DOS LAN Manager installation by inserting
the MS-DOS Setup diskette in drive A: and typing:
A:SETUP
Follow the instructions provided.
After the system reads the Microsoft Drivers 1 diskette, a
window appears, showing available network adapter drivers.
2 Select the option Select Other Driver.
3 When prompted to insert your network driver diskette,
insert the EtherDisk diskette.
After the driver is imported from the EtherDisk diskette, a
box will be displayed, showing the driver.
4 Select the EtherLink III PC Card driver.
5 Continue with the remainder of the installation by selecting a
protocol to use with the EtherLink III PC Card driver.
6 If you are not using Card Services and you are using a
memory manager, you must exclude the CIS memory
address range for the 3C589C PC Card and other Card
Services devices.
For more information, see the section "Avoiding Memory
Manager Conflicts" in Appendix A.
This completes the procedure for installing the 3Com NDIS
driver for LAN Manager.
4: I NDIS D
NSTALLING THE RIVER