Ibm Lan Server 4.0 For Dos And Os/2; Ibm Dos Lan Services Install V4.0 For Dos - 3Com ETHERLINK III LAN PC CARD User Manual

IBM LAN Server 4.0 for DOS and OS/2

To install the 3Com NDIS driver for IBM LAN Server 4.0, follow
these instructions. Instructions are provided for both DOS
and OS/2 installations.

IBM DOS LAN Services Install v4.0 for DOS

1 Insert the DOS LAN Services Disk 1 diskette into your
diskette drive.
2 Change to that drive and type:
INSTALL
3 Choose the directory where you want the software installed.
The default directory is C:\NET. A menu appears that provides
a list of network cards.
4 Choose Network card not shown in the list below...
5 Type:
A:\IBM_40
6 Remove the DOS LAN Services Disk 1 diskette and insert
the EtherDisk diskette.
The next menu displays the EtherLink III PC Card. Additional
menus will appear.
7 Choose the appropriate options for your network
environment.
Refer to the IBM manual if there are questions regarding
these menus.
8 If you are not using Card Services, you must exclude the
CIS memory address range for the 3C589C PC Card and
other Card Services devices.
For more information, see the section "Avoiding Memory
Manager Conflicts" in Appendix A.
9 After completing the installation, copy ELPC3.DOS to
C:\NET before rebooting.
Installing the NDIS Driver 4-7