Autolink Requirements; Autolink 3Install Account; Autolink.cfg File - 3Com ETHERLINK III LAN PC CARD User Manual

3-2 C
HAPTER

AutoLink Requirements

Verify that you meet the following requirements in addition
to those stated in Chapter 1.
The 3C589C PC Card must be installed in your PC and
connected to the network.
NetWare on the server must be version 2.2 or later.
You must have an assigned user ID and password on the
target NetWare server or you will not be able to log in to the
server after you run the AutoLink program.
Ask your MIS department or system administrator for your
user ID and password if you do not have one.

AutoLink 3Install Account

A 3Install account on the server allows the AutoLink program
to download the latest NetWare client software from the
server instead of from the EtherDisk diskette. The 3Install
account can be used to install newer versions of the software
or to customize your installation.
Installation instructions for creating the 3Install account and
preparing the server can be found in the
\QINSTALL\SERVER\README.TXT file on the EtherDisk
diskette.

AUTOLINK.CFG File

The AUTOLINK.CFG file can be used to modify the AutoLink
process. The AUTOLINK.CFG file in the root directory of the
EtherDisk diskette contains default settings and descriptions
of other control parameters. Appendix B contains a sample
AUTOLINK. CFG file.
3: I N
NSTALLING THE
W D
ET ARE RIVER