Banyan Vines - 3Com ETHERLINK III LAN PC CARD User Manual

4-4 C
HAPTER
15 If you are not using Card Services and you are using a
memory manager (all PCs running Windows have a
memory manager), you must exclude the CIS memory
address range for the 3C589C PC Card and other Card
Services devices.
For more information, see the section "Avoiding Memory
Manager Conflicts" in Appendix A.
This completes the procedure that imports the 3Com
network driver for Windows for Workgroups.

Banyan VINES

To install the 3Com NDIS driver for VINES 6.0, follow these
instructions. DOS must be installed on the target
workstation C: drive, or you must have a bootable DOS
floppy. Before you start, you need the IRQ for your adapter to
complete this procedure. To display the configuration with
the IRQ, see the instruction in the section "Displaying
Configuration Information" in Chapter 5.
1 Use the DOS MD command to create a subdirectory called
\VINES.
2 Copy the contents of the VINES LAN S/W (DOS) Install
diskette into the \VINES subdirectory.
3 Copy the contents of the NDIS subdirectory on the VINES
LAN S/W (DOS) 2 of 2 diskette into the \VINES
subdirectory.
4 Copy the PROTOCOL.INI fragment from the NDIS\DOS
subdirectory on the EtherDisk diskette to the \VINES
subdirectory.
5 Edit the PROTOCOL.INI file to read as follows:
[PROTOCOL MANAGER]
[VINES_XIF]
[ELINKPC3]
4: I NDIS D
NSTALLING THE
DRIVERNAME = PROTMAN$
DRIVERNAME = NDISBAN$
BINDINGS = ELINKPC3
DRIVERNAME = ELPC3$
RIVER