Artisoft Lantastic 6.0; Installing From The Dos Prompt; Installing From Windows - 3Com ETHERLINK III LAN PC CARD User Manual

4-10 C
HAPTER

Artisoft LANtastic 6.0

To install the 3Com NDIS driver (ELPC3.DOS) for Artisoft
LANtastic 6.0, follow these steps. You can install the driver
from either the DOS prompt or Windows.

Installing from the DOS Prompt

1 Insert Artisoft's LANtastic Disk 1 in the diskette drive.
2 Type:
INSTALL
This launches Windows and starts the installation of LANtastic.
3 Go to step 4 under the "Installing from Windows"
procedure and continue with the remaining steps.

Installing from Windows

1 Launch Windows, if it is not already opened.
2 Select Run from the File menu.
3 Type:
A:\INSTALL
If you are using a different drive, use the letter for that drive.
4 Follow the instructions and enter the PC name and
configuration information.
5 Select NDIS Support for Network Adapters in the Select
Network Adapter window.
6 When prompted, remove the LANtastic diskette, insert
the EtherDisk diskette provided with the 3C589C PC Card,
and press [Enter].
The NDIS driver is copied to your hard drive.
7 When prompted, reinsert the LANtastic Disk 1 in the drive.
8 If you are not using Card Services and you are using a
memory manager, you must exclude the CIS memory
4: I NDIS D
NSTALLING THE RIVER