Dec Pathworks For Dos/Windows Version 4.1 - 3Com ETHERLINK III LAN PC CARD User Manual

4-14 C
HAPTER
8 Choose the appropriate options for your network
environment.
Refer to the DEC manual for information regarding these menus.
9 Choose Other Network Adapter under the
Customize: Network Adapter Information menu.
10 If you are not installing Retail NetWare or NetWare with ODI
drivers, follow these instructions:
a On the Driver File: line, type:
a:\mslanman.dos\drivers\ethernet\elpc3\ELPC3.DOS
b On the PROTOCOL.INI Stub: line, type:
a:\mslanman.dos\drivers\ethernet\elpc3\protocol.ini
11 Verify that (l) Ethernet is marked and click OK.
12 Click OK under the Customize: Network Adapter Information
menu.
Additional menus will appear.
13 Follow the DEC instructions to complete the installation.
14 If you are not using Card Services and you are using a memory
manager, you must exclude the CIS memory address range for
the 3C589C PC Card and other Card Services devices.
For more information, see the section "Avoiding Memory
Manager Conflicts" in Appendix A.
15 Reboot the system.
16 This completes the installation procedure for DEC
PATHWORKS DOS/Windows version 5.1.

DEC PATHWORKS for DOS/Windows Version 4.1

To install DEC PATHWORKS version 4.1 on a DOS NDIS workstation,
DOS must be installed on the target workstation C: drive, or you
must have a bootable DOS floppy. Follow these steps:
1 Insert the PATHWORKS DOS Client Setup diskette
version 4.1 in your floppy drive.
4: I NDIS D
NSTALLING THE RIVER