Using The 3C589C-Tp Cable To Connect To The Network; Connecting The 3C589C Pc Card To The Network Using The; 3C589C-Tp Cable - 3Com ETHERLINK III LAN PC CARD User Manual

Using the 3C589C-TP Cable to Connect to the Network

To connect the 3C589C PC Card to the network with the
3C589C-TP cable and RJ-45 connector, follow these steps:
1 Attach the supplied PC Card cable with the RJ-45
connector to the PC Card connector, as shown in
Figure 2-3.
Figure 2-3 Connecting the 3C589C PC Card to the Network Using the

3C589C-TP Cable

2 Attach the RJ-45 connector on the other end of the PC
Card cable to the supplied network cable and then to the
network port, as shown in Figure 2-3.
Once the PC Card is connected to the network port, the
installation is complete.
To configure the 3C589C PC Card, go to Chapter 3 if you are
on a Novell NetWare network. If you are on any other
network operating system, go to Chapter 4, Installing the
NDIS Driver.
Connecting the 3C589C PC Card to the Network
RJ-45
connector
for network
6' Network cable
2-3
Network port
RJ-45
connector