Installing The Net Ware Driver; Autolink Program Overview - 3Com ETHERLINK III LAN PC CARD User Manual

3
The 3C589C PC Card software automatically installs the
NetWare DOS ODI client driver and updates the PC startup
files using the AutoLink feature. You can also use the
NetWare 4.X installer to install the 3Com NetWare driver and
add Windows client support, NetWare User Tools for
printing, and the capability to log in and out using Windows.
Ask your MIS department or system administrator which
network operating system you will be connecting to.
This chapter describes the AutoLink feature and using the
NetWare 4.X installer to install the driver.

AutoLink Program Overview

The AutoLink program performs the following functions:
Configures the 3C589C PC Card.
Installs the Novell NetWare DOS ODI (3C589.COM) driver.
Logs in to the server and updates the NetWare client
software if a 3Install account exists on the server; otherwise,
the client software is installed from the EtherDisk diskette.
Modifies the CONFIG.SYS and AUTOEXEC.BAT files and
copies the NET.CFG file. (The original versions of these files
are renamed CONFIG.3CM and AUTOEXEC.3CM.)
If you want to configure the PC Card as an NDIS client, see
Chapter 4, Installing the NDIS Driver.
I
NSTALLING THE
N W
ET ARE
D
RIVER