Motion Detection; Figure 42 Alarm-In Actions Setup Screen - ADT 4-Channel User Manual

User's Manual
You can set up the DVR to start panic recording whenever it senses an input on one of its alarm
input connectors. Highlight the box beside Panic Record and press the
Inputs appears, and you can select which alarm input you want associated with panic recording.
The DVR will continue panic recording until an input on the selected alarm input is released as
long as the
PANIC
Highlight the Actions tab, and the Alarm-In Actions setup screen appears.
Figure 42 Alarm-In Actions setup screen.
Highlight the desired box under the Alarm-Out heading, and press the
Alarm Output and Beep (DVR's internal buzzer) that you would like to activate and to sound
whenever the DVR detects an input on the associated alarm input.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to
the Event mode in the Alarm-Out setup screen (Schedule tab).
Highlight the desired box under the Notify heading, and press the
menu appears.
Highlight the desired box under the PTZ heading, and press the
appear. Select the preset position for each PTZ camera, where you want PTZ cameras to move
to whenever the DVR detects an input on the associated alarm input.
Motion
Detection
Highlight Motion Detection in the Event menu and press the
setup screen appears.
40
button is not pressed to stop the panic recording.
You can toggle the entire list On and Off by highlighting Notification
and pressing the
and Off by highlighting that item and pressing the
OK and press the
NOTE: For the Notify action, the notify item you select should
be enabled in the Notification setup screen and the DVR should
be registered in the RAS (Remote Administration System).
You can set the actions the DVR will take
whenever it senses an input on one of its alarm
input connectors.
Highlight the desired box under the Record
heading, and press the
cameras appears. Select the cameras that you
want the DVR to record whenever it detects
an input on the associated alarm input.
NOTE: For the Record action, the camera
you select should be set to the Event or
Time & Event recording mode in the Record
Schedule setup screen.
button. You can toggle the individual items On
button to accept your changes.
button. A list of PTZ presets
button. The Motion Detection
button. A list of Alarm
button. A list of
button. Select between
button. The Alarm-In Notify
button. Highlight