Front Cover - Invacare Kite Service Manual

SERVICE MANUAL
8.1.4

Front cover

Requirements:
· 4 mm Allen wrench
· 5 mm Allen wrench
· 10 mm Allen wrench
· 11 mm socket wrench
· 13 mm socket wrench
· 13 mm open-ended wrench
· 19 mm open-ended wrench
· 36 mm open-ended wrench
· 24 mm box wrench
· torque wrench 20 – 200 Nm
· wooden blocks
Removing the front cover:
·
Disassemble the double bearing of the Dual Swing Technology (D.S.T.), as described in
chapter 8.13.
·
Use a 4 mm Allen wrench to loosen both hexagon socket head screws.
·
Remove both hexagon socket head screws, including the washers.
·
Remove the cover (2) towards the front.
·
Replace the cover.
Installing the front cover:
·
Assemble the parts in reverse order.
32
®
Invacare - Kite