®
Invacare
- PRONTO M41
Installing the front cover
●
Pull joystick cable through the center hole in the top cover (5).
●
Place the top cover (5) on the base frame.
Note
Pull the cover forward to clear the motor release levers.
●
Install the two screws (2) that secure the top cover (5) to the frame (3). Do not overtighten.
●
Attach the front cover (1) to the top cover (5).
●
Install the two screws (2) that secure both the top cover (5) and front cover (1) to the frame (3).
Do not overtighten.
●
Install the seat assembly, as described in chapter 8.2.1.
●
Connect the joystick, as described in chapter 8.11.3
7.8.2
Removing/Installing the front cover
Removing the front cover
●
Remove the two screws (2) that secure both the top cover (5) and front cover (1) to the
frame (3).
●
Remove the front cover (1) from the frame (3).
Installing the front cover
●
Insert the tabs at the bottom of the front cover (1) into the slots in the bottom of the frame (3).
●
Secure the bottom of the front cover (1) to the frame using the two screws (2).
Do not overtighten.
SERVICE MANUAL
45