Repair Work; Covers; Rear Cover - Invacare Kite Service Manual

®
Invacare - Kite
8

Repair work

CAUTION!
Danger of injury and damage to property, if the maximum speed reduction on a
wheelchair with a lifter does not function correctly!
The wheelchair's control unit must reduce the maximum possible speed as soon as the
lifter is raised.
· Test the maximum speed reduction for correct function after any maintenance work or
modifications to the wheelchair.
8.1

Covers

8.1.1

Rear cover

Removing the rear cover:
·
Loosen and remove the left and right thumbscrews (1) on the rear cover (2).
·
Carefully pull the rear cover backwards and off.
·
On models with LED lighting system (tail lights in the rear cover):
Pull both of the tail light plugs off of the lighting circuit board.
Assembling the rear cover:
·
On models with LED lighting system:
Plug both of the tail light plugs back into the lighting circuit board.
·
Push the rear cover over the battery box from the back. Pay attention to the electrical cables
while doing so.
·
Tighten both thumbscrews hand-tight.
SERVICE MANUAL
29