Replacing A Rear Splash Guard - Invacare Kite Service Manual

®
Invacare - Kite
9.1.2

Replacing a rear splash guard

Requirements:
· 6 mm Allen wrench
Note
Different splash guards must be fitted, depending on the seat depth, seat width and which seat
support plates are installed.
·
Use the following table to determine which splash guards must be fitted and whether the
splash guards need to be replaced.
Removing the splash guard:
·
Loosen and remove both hexagon socket head screws (1) together with the washers.
·
Remove the splash guard (2) from the gearbox holder (3).
·
Replace the splash guard.
Installing a splash guard:
·
Assemble the parts in reverse order.
SERVICE MANUAL
99