Table of Contents
Advertisement
[Address Reg.] ([Annotation]) ([Send])
To display: [Box] - [System] - [Annotation] - Select a User Box - [Open] - Select the file - [Send] - [Direct
Input] - Enter Destination - [Address Reg.]
You can register the destination that you have entered directly into the address book. For details on how to
register it, refer to [User's Guide: Scan Operations].
[Resolution] ([Annotation]) ([Send])
To display: [Box] - [System] - [Annotation] - Select a User Box - [Open] - Select the file - [Send] - [Resolution]
Select a resolution level to use to send files.
Settings
[Scan Resolution]
Tips
-
If the resolution is high, a large amount of information is scanned and the transmission time increases.
When you are using the E-mail TX, make sure that the data capacity is not restricted.
d-Color MF552/452/362/282/222
Description
Select the resolution to be used for scanning and sending of the original.
To use E-mail TX, SMB TX, FTP TX, or WebDAV TX, the following resolution
is selected for sending.
•
[Settings when saving]: Select this option to send the document in the
same resolution as used for saving.
•
[200 e 200 dpi]: Select this option to send the document in the standard
resolution.
•
[300 e 300 dpi]: Select this option to send the document in a higher res-
olution than the normal resolution.
•
[400 e 400 dpi]: Select this option to send the document containing
small characters and drawings.
•
[600 e 600 dpi]: Select this option to convert the original to a file of the
largest possible size. Use this option to scan a file such as a full color
photo to have a fine image quality level.
15
15-191
Advertisement
Table of Contents
