Automatic Send - Olivetti d-Copia 283MF Plus Operation Manual

FAX Operation (Basic)

Automatic Send

General transmission using the numeric keys is explained.
Switching to the Send Screen
Ready to send.
Text+Photo 200x100dpi
[Orig.Img] [FAX Res.]
Selection of Transmission Method
Setting for Direct
transmission
Off
On
3-2
2009/05/25 12:30
Starts memory transmission.
After originals are scanned into memory, the communication starts.
Starts direct transmission.
Dials the receiving system, and after the communication has
started, originals are scanned.
1
Press the FAX key. Check that the basic send
screen is displayed.
NOTE:
Depending on the settings, the Address Book
screen may appear. In this event, press Reset to
display the basic screen for sending.
2
There are two transmission methods - memory
transmission and direct transmission. The default is
memory transmission.
To select direct transmission, use the following
procedure.
1 Press the Function Menu key.
2 Press the or
TX].
3 Press the OK key.
4 Press the or
5 Press the OK key.
Description
NOTE:
In direct transmission, you can designate only
one destination for one transmission.
key to select [FAX Direct
key to select [On].
OPERATION GUIDE