Table of Contents
Advertisement
15
[FTP] ([Annotation]) ([Send])
To display: [Box] - [System] - [Annotation] - Select a User Box - [Open] - Select the file - [Send] - [Direct
Input] - [FTP]
Enter the host name or IP address of the destination FTP server to send files to the FTP server.
When specifying multiple destinations, tap [Next Dest.] to add destinations.
Settings
[Host Name]
[File Path]
[User Name]
[Anonymous]
[Password]
[Port Number]
[Proxy]
[PASV]
15-186
Description
Enters the host name or IP address of the destination FTP server (up to 63
bytes long).
•
Example of host name entry: "host.example.com"
•
Example of IP address (IPv4) entry: "192.168.1.1"
•
Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Enter the storage folder name of FTP server specified as the [Host Name]
(up to 127 bytes long).
•
Entry example: "scan"
Enter the login user name (using up to 64 characters) if the authentication
is required by the destination FTP server.
•
Entry example: "public_user"
When authentication is not required for the destination FTP server, select
this item.
Enter the password of the user specified in [User Name].
If necessary, change the port number.
Normally, you can use the original port number.
When a proxy server is used in your environment, select this item.
When a PASV server is used in your environment, select this item.
d-Color MF552/452/362/282/222
Advertisement
Table of Contents
