12
12.2
Supported USB memory devices
USB memory devices that have the following specifications can be connected to this machine.
Item
Interface
Format
Security
Memory size
Note the following points when connecting a USB memory device to this machine.
-
Insert USB memory device into USB port near the Touch Panel. Leave the USB port open at a position
close to the rear panel. Use it for optional device connection.
-
When you are saving files into or printing files from a USB memory, do not disconnect it from the USB
port.
-
Do not use USB devices (such as hard disk unit and a USB switching hub) except for a USB memory.
-
When this machine is operating and when hourglass is displayed on the Touch Panel, do not insert or
remove the USB memory device to/from USB port.
-
Do not disconnect the USB memory directly after connecting it.
12-4
Requirement
Compatible with USB Version 1.0/2.0 interface
FAT32 format files
Securities such as data encryption and password lock shall be released, or
the security function shall be turned Off.
Up to 2 GB is recommended
•
Devices with a memory size of 4 GB or greater may not operate cor-
rectly.
•
A USB memory device, which is recognized as multiple drives, cannot
be used.
Supported USB memory devices
d-Color MF552/452/362/282/222
12.2