Table of Contents
Advertisement
15
[Line Setting] ([Public]/[Personal]/[Group]) ([Send])
To display: [Box] - Select a User Box - [Open] - Select the file - [Send] - [Application] - [Fax Setting] - [Line
Setting]
Specify how to send a fax based on the line conditions.
Settings
[TX Method]
[Check Dest. and Send]
[Select Line]
15-66
Description
Change the communication mode based on the line conditions.
•
[Overseas TX]: Select this option to send a fax to areas where commu-
nication conditions are poor. Faxes are sent at a lower speed.
•
[ECM]: Generally, faxes are sent while checking that the fax data is free
of errors by using ECM (Error Correction Mode). To reduce the time re-
quired to send a fax, cancel the setting.
•
[V.34]: Generally, faxes are sent in the Super G3 mode. If it is not pos-
sible to send faxes in the Super G3 mode, cancel the setting.
Select this option to use the Check Dest. and Send function.
The fax number specified for fax is checked against the remote fax number
(CSI) and the fax is sent only when they match.
If two lines are used, select the line used to send faxes.
If [No Selection] is selected, either line, whichever is not busy, is used for
transmission.
d-Color MF552/452/362/282/222
Advertisement
Table of Contents
