[Staple] ([Annotation]) ([Print]); [Punch] ([Annotation]) ([Print]) - Olivetti d-COLOR MF222 Operation Manual

[Staple] ([Annotation]) ([Print])

To display: [Box] - [System] - [Annotation] - Select a User Box - [Open] - Select the file - [Print] - [Finishing]
- [Staple]
Select the binding positions for stapling the sheets.
Settings
[Corner]
[2 Position]
[Position Setting]
Tips
- The Finisher is required to use the Staple function.

[Punch] ([Annotation]) ([Print])

To display: [Box] - [System] - [Annotation] - Select a User Box - [Open] - Select the file - [Print] - [Finishing]
- [Punch]
Select binding positions when punching sheets.
Settings
[Position Setting]
d-Color MF552/452/362/282/222
Description
Each set of printed sheets is stapled in a corner (top left or top right) before
being output.
Each set of printed sheets is stapled at two positions (in the top, left, or
right) before being output.
Select the binding position. If [Auto] is specified for the binding position,
the binding position is determined automatically based on the direction of
print file.
Description
Select a position to punch. If the punch position is set to [Auto], the posi-
tion to punch is determined automatically based on the direction of print
file.
15
15-167