Alert Messages That Are Printed On Error Logs And Reports - Ricoh P800 User Manual

5. Troubleshooting
Alert Messages that Are Printed on Error Logs
and Reports
This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
Message
"84: Error"
"85: Error"
"86: Error"
"91: Error"
"92: Error"
"Address book is in use."
"Auto-user prog. failed."
118
Cause
There is no work area available
for image processing.
The specified graphics library is
unavailable.
Parameters of the control code
are invalid.
Printing was canceled by the
auto job cancel function due to
a command error.
Printing was canceled because
the [Job Reset] key or the
[Suspend/Resume] key was
pressed on the machine's
control panel.
The machine currently cannot
perform authentication because
the Address Book is being used
by another function.
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because
the Address Book is full.
Solution and reference
Select [Font Priority] for
[Memory Usage] in [System].
Decrease the number of files
sent to the machine.
Check that the data is valid.
Check the print settings.
Check that the data is valid.
Perform the print operation
again as necessary.
Wait a while, and then retry the
operation.
Check the address book.
see "Managing the User
Information Registered
Automatically", User Guide (Full
Version).