4 0
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 26). Remove the logs, ember strips, and kibbles (if installed - page 27)
2
Remove the burner (see illustration below).
NOTE:
When replacing the
burner, make sure the
burner inserts all the way
up against the orifice
shoulder.
Travis Industries
Optional Equipment
Remove the grate
a
and cast brick floor.
Cast Brick Floor
Remove the screw holding
b
the burner in place.
Slide the burner to the right
c
and up to remove the
burner.
Orifice
Orifice
Shoulder
Burner
Burner
9 3 5 0 8 1 0 3
Grate
1/4" Nutdriver
1 5 1 0 0 2