Table of Contents
Advertisement
32
Starting the Fireplace for the First Time
+
Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will
cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This is
normal. We recommend opening a window to vent the room.
+
Condensation may appear on the glass each time you start the fireplace - this is normal.
+
Blue Flames will occur on the fireplace when it first comes on. After fifteen minutes the flames will
turn a more realistic yellow and orange color.
?
Certain installations use a remote "wall switch" to turn the fireplace on and off. If this is the case, leave
the ON/OFF switch "ON".
Turning the Fireplace On and Off
After the pilot has been started...
Use this switch to
turn the main burner
on and off manually.
!
Do not place any combustible items on top of or directly in front of the fireplace, even temporarily. The
optional thermostat may start the fireplace causing a combustible item to ignite.
?
If the fireplace turns on and off frequently while using the thermostat, you may want to adjust the flame
height down until it produces just enough heat needed.
Adjusting the Flame Height
+
Your fireplace has an adjustable flame to tailor the look and heat output to your specific needs. It is
adjusted by turning the middle dial on the gas control valve.
Travis Industries
Operation
See the instructions included
with the remote for details on
operation.
O
O
See the instructions
included with the
remote for changing
the battery.
Flame Height
Adjustment Knob
PILOT ADJ
Turn clockwise to adjust the flame higher, counter-clockwise to lower.
Index Mark
9 3 5 0 8 1 0 3
For systems with wall
thermostats, use this switch to
control the temperature (right
is hotter, left cooler). Some
systems require the on/off
switch to be on.
1 5 1 0 0 2
Hide quick links:
Advertisement
Table of Contents
