Table of Contents
Advertisement
<Method of setting DVD test mode>
1.Main body "Stop button
is turned on.
2.The display of the FL display becomes "TEST D", and becomes a test mode.
T
E
S
3.Comes off the test mode when the power supply is turned off by "STANDBY button
4.Use key in test mode
[STOP]+[DVD EJECT]+AC opening:Test mode
[STANDBY]:Test mode release
[ON SCREEN] : Self adjustment command for test
[DVD EJECT] : EJECT command for test
[STOP] : STOP command for test
[DVD PAUSE] : Self adjustment command for test
[DVD PLAY] : Jitter measurement command for test
[ENTER] : EEPROM initialization command
[
] : Outer tracking OFF command
[
] : Tracking OFF of surroundings on inside command
[1]~[9] : Servo relation examination command
[MENU] : Display of number of ROM
[TOP MENU] : Display of number of ROM
5.Content of processing
(1) A reproduction and posed inside display the jitter measurement value and the value of the
current of the laser on the FL display in the TEST mode.
FIX4
FL display
T
E
S
X
X
Value of current of laser
" and "DVD eject button
T
BYTE7
Value of current of laser (subordinate position)
BYTE8
Value of current of laser (high rank)
BYTE9
Jitter measurement value (subordinate position)
BYTE10
Jitter measurement value (high rank)
T
X
X
" are pushed at the same time, and the power supply
D
R
D
R
Y
Y
Y
Jitter measurement value
UX-A10DVD
2
".
2
Y
1-41
Advertisement
Table of Contents
