UX-A10DVD
Removing the FL display section
1.
Remove the four screws D' attaching the case cover
on the front panel.
2.
Pull out the FL panel from the four joint bosses m on
the FL display cover.
3.
Remove the four screws E' attaching the FL display
cover. Disconnect the card wire from connector
CN451 on the FL relay board and from CN452 on
the LED board.
E'
1-16
(See Fig.46~51)
FL display cover
Fig.48
m
FL connection board
CN451
E'
D'
Case cover
D'
Fig.46
FL panel
Fig.47
LED board
CN452
FL display cover
Fig.49
m