Dynamic Users Log - ZyXEL Communications UAG2100 User Manual

Table 42 Monitor > Log > View AP Log (continued)
LABEL
Source
Destination
Note

7.17.2 Dynamic Users Log

Use this screen to view the UAG's dynamic guest account log messages. Click Monitor > Log >
Dynamic Users Log to access this screen.
Figure 60 Monitor > Log > Dynamic Users Log
The following table describes the labels in this screen.
Table 43 Monitor > Log > Dynamic Users Log
LABEL
Begin/End Date
Begin/End Time
Search
Refresh
Clear Log
#
Status
Chapter 7 Monitor
DESCRIPTION
This displays the source IP address of the selected log message.
This displays the source IP address of the selected log message.
This displays any notes associated with the selected log message.
DESCRIPTION
Select the first and last dates to specify a time period. The UAG displays log messages only
for the accounts created during the specified time period after you click Search.
Select the begin time of the first date and the end time of the last date to specify a time
period. The UAG displays log messages only for the accounts created during the specified
time period after you click Search.
Click this button to update the information on the screen using the filter criteria in the date
and time fields.
Click this button to update the information in the screen.
Click this button to delete the log messages for invalid accounts.
This is the index number of the dynamic guest account in the list.
This field displays whether an account expires or not.
UAG2100 User's Guide
97