ZyXEL Communications UAG2100 User Manual page 223

24.2.2.3 Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the settings for the
RADIUS server. Then, set up the authentication method, and configure the UAG to use the
authentication method. Finally, force users to log into the UAG before it routes traffic for them.
Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry.
1
Configure the RADIUS server's address, authentication port (1812 if you were not told otherwise),
and key. Click Apply.
Figure 144 Configuration > Object > AAA Server > RADIUS > Add
Click Configuration > Object > Auth. Method. Double-click the default entry. Click the Add
2
icon. Select group radius because the UAG should use the specified RADIUS server for
authentication. Click OK.
Figure 145 Configuration > Object > Auth. method > Edit
Chapter 24 Web Authentication
UAG2100 User's Guide
223