Ipnp Screen - ZyXEL Communications UAG2100 User Manual

Unified access gateway

Hide thumbs Also See for UAG2100:

Table of Contents

23.2 IPnP Screen

This screen allows you to enable IPnP on the UAG and specific internal interface(s). To access this

screen click Configuration > Network > IPnP.

Figure 136 Configuration > Network > IPnP

The following table describes the labels in this screen.

Table 100 Configuration > Network > IPnP

Chapter 23 IPnP

Select this option to turn on the IPnP feature on the UAG.

Note: You can enable this feature only when the firewall is enabled.

The Available list displays the name(s) of the internal interface(s) on which you can

enable IPnP.

To enable IPnP on an interface, you can double-click a single entry to move it or use the

[Shift] or [Ctrl] key to select multiple entriess and click the right arrow button to add to the

Member list. To remove an interface, select the name(s) in the Member list and click the

left arrow button.

Click Apply to save your changes back to the UAG.

Click Reset to return the screen to its last-saved settings.

UAG2100 User's Guide

Show Quick Links

Table of Contents