ZyXEL Communications UAG2100 User Manual page 219

Table 101 Configuration > Web Authentication (continued)
LABEL DESCRIPTION
Exceptional Use this table to list services that users can access without logging in.
Services
Click Add to change the list's membership. A screen appears. Available services appear on
the left. Select any services you want users to be able to access without logging in and
click the right arrow button to add them. The member services are on the right. Select any
service that you want to remove from the member list, and click the left arrow button to
remove them.
Keeping DNS as a member allows users' computers to resolve domain names into IP
addresses.
Figure 140 Configuration > Web Authentication > Add Exceptional Service
In the table, select one or more entries and click Remove to delete it or them.
Web Use this table to manage the UAG's list of web authentication policies.
Authentication
Policy Summary
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Move To move an entry to a different number in the list, click the Move icon. In the field that
appears, specify the number to which you want to move the interface.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Priority This is the position of the authentication policy in the list. The priority is important as the
policies are applied in order of priority. Default displays for the default authentication
policy that the UAG uses on traffic that does not match any exceptional service or other
authentication policy. You can edit the default rule but not delete it.
Source This displays the source address object to which this policy applies.
Destination This displays the destination address object to which this policy applies.
Schedule This field displays the schedule object that dictates when the policy applies. none means
the policy is active at all times if enabled.
Chapter 24 Web Authentication
UAG2100 User's Guide
219