ZyXEL Communications UAG2100 User Manual page 62

Table 13 Dashboard (continued)
LABEL DESCRIPTION
Action Use this field to get or to update the IP address for the interface.
Click Renew to send a new DHCP request to a DHCP server.
Click the Connect icon to have the UAG try to connect a PPPoE/PPTP interface. If the
interface cannot use one of these ways to get or to update its IP address, this field displays
n/a.
Click the Disconnect icon to stop a PPPoE/PPTP connection.
Extension Slot This section of the screen displays the status of the USB ports.
# This field displays how many USB ports there are.
Extension This field displays the name of each extension slot.
Slot
Device This field displays the name of the device connected to the extension slot (or none if no
device is detected).
Status Ready - A USB storage device connected to the UAG is ready for the UAG to use.
none - The UAG is unable to mount a USB storage device connected to the UAG.
Licensed Service
Status
# This shows how many licensed services there are.
Status This is the current status of the license.
Name This identifies the licensed service.
Version This is the version number of the service.
Expiration If the service license is valid, this shows when it will expire. n/a displays if the service
license does not have a limited period of validity. 0 displays if the service is not licensed or
has expired.
System
Resources
CPU Usage This field displays what percentage of the UAG's processing capability is currently being
used. Hover your cursor over this field to display the Show CPU Usage icon that takes
you to a chart of the UAG's recent CPU usage.
Memory This field displays what percentage of the UAG's RAM is currently being used. Hover your
Usage
cursor over this field to display the Show Memory Usage icon that takes you to a chart
of the UAG's recent memory usage.
Flash Usage This field displays what percentage of the UAG's onboard flash memory is currently being
used.
USB Storage This field shows how much storage in the USB device connected to the UAG is in use.
Usage
Active This field displays how many traffic sessions are currently open on the UAG. These are all
Sessions
sessions, established and non-established, that pass through/from/to/within the UAG.
Hover your cursor over this field to display icons. Click the Detail icon to go to the
Session Monitor screen to see details about the active sessions. Click the Show Active
Sessions icon to display a chart of UAG's recent session usage.
AP Information This shows a summary of connected wireless Access Points (APs).
All AP This section displays a summary for all connected wireless APs. Click the link to go to the
AP information > AP List screen.
Online This displays the number of currently connected management APs.
Management
AP
Offline This displays the number of currently offline managed APs.
Management
AP
Chapter 6 Dashboard
UAG2100 User's Guide
62