ZyXEL Communications UAG2100 User Manual page 330

Figure 219 Configuration > Object > AAA Server > RADIUS > Add
The following table describes the labels in this screen.
Table 165 Configuration > Object > AAA Server > RADIUS > Add
LABEL DESCRIPTION
Name Enter a descriptive name (up to 63 alphanumerical characters) for identification purposes.
Description Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Server Address Enter the address of the RADIUS server.
Authentication Specify the port number on the RADIUS server to which the UAG sends authentication
Port requests. Enter a number between 1 and 65535.
Backup Server If the RADIUS server has a backup server, enter its address here.
Address
Backup Specify the port number on the RADIUS server to which the UAG sends authentication
Authentication requests. Enter a number between 1 and 65535.
Port
Timeout Specify the timeout period (between 1 and 300 seconds) before the UAG disconnects from
the RADIUS server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the RADIUS server or the
RADIUS server is down.
NAS IP Address If the RADIUS server requires the UAG to provide the Network Access Server (NAS) IP
address attribute with a specific value, enter it here.
Case-sensitive Select this if the server checks the case of the usernames.
User Names
Chapter 36 AAA Server
UAG2100 User's Guide
330