Genie S-60 Operator's Manual page 15

Second Edition • Fifth Printing
Deutz F4L 1011F Engine
Oil capacity (including filter)
Oil viscosity requirements
below 60°F / 15.5°C (synthetic)
-10°F to 90°F / -23°C to 32°C
above -4°F / -34°C
Engine oil should have properties of API classification
CC/SE or CC/SF grades.
Units ship with 10-40 CC/SG.
Perkins 704-30 Engine
Oil capacity (including filter)
Oil viscosity requirements
below 60°F / 15.5°C
-10°F to 90°F / -23°C to 32°C
above -4°F / -34°C
Engine oil should have properties of API classification
CF4 grade.
Units ship with 10-40 CC/SG.
Part No. 43648
Check the Hydraulic Oil Level
11 quarts
10.5 liters
5W-30
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
10W-40
oil levels can damage hydraulic components. Daily
15W-40
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure that the boom is in the stowed position,
9.6 quarts 9 liters
15W-40
10W-30
Hydraulic oil specifications
15W-40
Hydraulic oil type
Tank capacity
Hydraulic system
(including tank)
Genie S-60 & Genie S-65
then visually inspect the sight gauge located on
the side of the hydraulic oil tank. Add oil as
needed.
Result: The hydraulic oil level should be within
the top 2 inches (5 cm) of the sight gauge.
Operator's Manual
MAINTENANCE
Dexron equivalent
45 gallons
170 liters
53 gallons
201 liters
13