Ordering Supplies; Using Genuine Lexmark Parts And Supplies; Estimated Number Of Remaining Pages; Ordering A Toner Cartridge - Lexmark XM7100 Series User Manual

Maintaining the printer

Ordering supplies

To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized
supplies dealers in your area. In other countries or regions, go to
purchased the printer.
Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies
or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party
supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts is not covered
by the warranty. All life indicators are designed to function with Lexmark supplies and parts, and may deliver
unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or its associated components.

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy may
vary significantly and is dependent on many factors, such as actual document content, print quality settings, and
other printer settings.
The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is
different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing
supplies based on the estimate. Until an adequate print history is obtained on the printer, the estimated cartridge yield is
based on approximately 5% coverage per page.

Ordering a toner cartridge

Notes:
•
The estimated cartridge yield is based on approximately 5% coverage per page.
• Extremely low print coverage for extended periods of time may negatively affect actual yield.
Item
Extra High Yield Toner Cartridge

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the
front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the
fuser.
www.lexmark.com or contact the place where you
Return Program cartridge
24B6020
251