Panasonic WV-CS554 Operating Instructions Manual page 40

11. Special 2 Menu (SPECIAL2)
Special Menu (SPECIAL)
This menu lets you adjust and set up the picture quality to meet your
requirements.
• Display SET UP on the monitor screen.
(Refer to Setup Menu Display on page 14 for details on display-
ing the SET UP on the monitor screen.)
• Move the cursor to SPECIAL2 (SPECIAL) and press the F2 button
of the WV-CU550B. The special menu appears on the monitor
screen.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for more than 2 seconds.)
(1) Chroma Level Setting (CHROMA GAIN)
1. Move the cursor to CHROMA GAIN. The "I" cursor appears in
inversed video.
2. While observing the vectorscope or color video monitor, adjust
the chroma level by using the joystick. The "I" cursor moves to
the left or right.
To reset to the factory setup, press the F2 button of the WV-
CU550B.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for more than 2 seconds.)
(2) Aperture Level Setting (AP GAIN)
1. Move the cursor to AP GAIN. The "I" cursor appears in inversed
video.
2. While observing the video monitor, adjust the aperture level with
the joystick. The "I" cursor moves to the left (soft) or right (sharp).
To reset to the factory setup, press the F2 button of the WV-
CU550B.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for more than 2 seconds.)
(3) Pedestal Level Setting (PEDESTAL)
1. Move the cursor to PEDESTAL. The "I" cursor appears in
inversed video.
2. While observing the waveform monitor/oscilloscope or video
monitor, adjust the pedestal level (black level) by moving the joy-
stick. The "I" cursor moves to the left (low, dark) or right (high,
bright).
To reset to the factory setup, press the F2 button of the WV-
CU550B.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for more than 2 seconds.)
(4) Camera Phase (Hue) Setting (HUE)
1. Move the cursor to HUE. The "I" cursor appears in inversed
video.
2. While observing the vector scope or color video monitor, adjust
the chroma phase (hue) by using the joystick. The cursor moves
to the left or right.
To reset to the factory setup, press the F2 button of the WV-
CU550B.
(For the WV-RM70, keep pressing the Right and Left switches
simultaneously for more than 2 seconds.)
41
Camera setting menu
** SET UP **
CAMERA ID OFF
ALC/MANUAL ALC
SHUTTER ---
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
Special 2 menu
** SPECIAL2 **
CHROMA GAIN •••• ••••
|
AP GAIN •••• ••••
|
PEDESTAL • •••••••
|
HUE ••••|••••
- +
BW OFF
BURST(BW) ON
→ PUSH SW
REFRESH
→ PUSH SW
CAMERA RESET
RET
Special menu
** SPECIAL **
CHROMA GAIN •••• ••••
|
AP GAIN ••••••• | •
PEDESTAL ••• •••••
|
HUE ••••|••••
- +
→ PUSH SW
REFRESH
→ PUSH SW
CAMERA RESET
RET
** SPECIAL2 **
CHROMA GAIN •••• ••••
|
AP GAIN •••• ••••
|
PEDESTAL • | •••••••
HUE ••••|••••
- +
BW OFF
BURST(BW) ON
→ PUSH SW
REFRESH
→ PUSH SW
CAMERA RESET
RET
** SPECIAL2 **
CHROMA GAIN •••• ••••
|
AP GAIN •••• ••••
|
PEDESTAL • | •••••••
HUE ••••|••••
- +
BW OFF
BURST(BW) ON
→ PUSH SW
REFRESH
→ PUSH SW
CAMERA RESET
RET
** SPECIAL2 **
CHROMA GAIN •••• ••••
|
AP GAIN •••• | ••••
PEDESTAL • •••••••
|
HUE ••••|••••
- +
BW OFF
BURST(BW) ON
→ PUSH SW
REFRESH
→ PUSH SW
CAMERA RESET
RET