Panasonic WV-CS554 Operating Instructions Manual page 10

(6) Password Lock ON/OFF (PASSWORD LOCK ON/OFF)
This setting controls access to the PRIVACY ZONE to be free or limited. If PASSWORD LOCK ON is
selected, the (DIS) follows the PRIVACY ZONE ON or OFF set on the SPECIAL1 menu.
(7) Cleaning ON/OFF
This is for refreshing the electric-mechanical contacts built in the camera. Use this function for main-
tenance when the camera has been directed to a specific spot or panned over a specific range for a
long time.
(8) Electric Zoom ON/OFF
Up to ten-fold
ing.
(9) Preset Alarm ON/OFF
Alarm signals are output in the following cases if ON is selected.
• Position move is completed in SEQ mode.
• Position move is completed in SORT mode.
• Position move is completed at HOME position in SELF RETURN mode.
• Position move is completed in command request.
• Position move is completed in ALARM IN.
• Position move to the start point is completed for AUTO PAN.
• Position move to the start point is completed for PATROL PLAY.
Camera
(1) Camera Identification (CAMERA ID)
You can use the camera identification (CAMERA ID) to assign a name to the camera. The camera ID
consists of up to 16 alphanumeric characters. You can select whether to have the camera ID dis-
played on the monitor screen or not.
See page 32 for the setting.
(2) Light Control (ALC/MANUAL)
You can select the mode for adjusting the lens iris.
The modes are as follows:
ALC: The lens iris is automatically adjusted according to the brightness of the object.
You can select one of two modes (SUPER-D2 ON or SUPER-D2 OFF).
MANUAL: The lens iris is fixed at the value you have set regardless of the brightness of the object.
• ALC Mode with SUPER-D2 ON
Super Dynamic 2 Function (SUPER-D2)
The important object in a scene is usually placed in the center of the monitor's screen. In SUPER-D2
mode, more photometric weight is given to the center of the screen (where the important object is
located) than to the edge of the picture (where a bright backlight would most likely be located).
You can use the SUPER-D2 function if you select ALC. It eliminates interference by strong back-
ground lighting which makes the camera picture dark, such as a spotlight.
See page 33 for the setting.
• ALC Mode with SUPER-D2 OFF
In this mode, the picture is divided into 48 areas. If there is a source of brightness that interferes with
the clarity of the picture in these masks, corresponding areas mask the light to keep the clarity of the
picture.
11
( two-fold) electrical zooming is available beside 22-fold optical zoom-