Panasonic WV-CS554 Operating Instructions Manual page 25

Setting [ON (USER)]
If ON (USER) is selected on the SPECIAL 1 menu, the Area Title
selection menu appears. The screen has the number column and
title column above RET and RESET.
Note: The area numbers followed by an asterisk * have already
preset.
1. To select a camera direction, move the cursor to the desired num-
ber, then press the CAM (SET) key. The direction menu of the
selected number appears.
2. Adjust PAN/TILT, ZOOM/FOCUS and display position in the as
same way as AREA TITLE, DIRECTION (NESW). See page 25.
3. To add a user-customized title, move the cursor to the title of the
desired number, then press the CAM (SET) key. AREA TITLE
menu of the selected number appears.
AREA TITLE Editing
1. Move the cursor to the desired character in the character field
using the joystick then press the CAM (SET) key.
2. The selected character appears in the editing field and the blink-
ing cursor moves one position to the right.
3. Repeat steps 1 and 2 until one area title is completed.
4. Move the cursor to POSI
display position of the area title appears on the monitor. If need-
ed, change the display position by moving the joystick, then press
the MON (ESC) key.
To Quit Editing
• To return to the menu Area Title selection, move the cursor to
RET, then press the CAM (SET) key.
• To cancel one area title, move the cursor to RESET, in the AREA
TITLE menu, then press the CAM (SET) key.
• To return to the menu SPECIAL 1, move the cursor to RET, then
press the CAM (SET) key.
• To erase all the area titles, move the cursor to RESET, in the AREA
TITLE selection menu, then press the CAM (SET) key.
Notes:
• An area title is displayed under the camera ID if both of them
are set in the same position. If different, they are displayed in
the area title position.
• An area title appears while the camera direction deviates
within 45 degrees from the set position. If two or more area
numbers share a common subject in a scene, the title of the
largest number is displayed.
26
, then press the CAM (SET) key. The
SPECIAL1 menu
** SPECIAL1 **
PRIVACY ZONE ON (DIS)
PROPO. P/T OFF
AREA TITLE ON (USER)
PATROL PLAY
ALARM IN/OUT
PASSWORD LOCK ON
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
RET
AREA TITLE (USER) selection menu
** AREA TITLE (USER) **
1*1 NORTH
2 NORTH-EAST
3 EAST
4 SOUTH-EAST
5*
6 SOUTH-WEST
7 WEST
8
RET RESET
DIRECTION (USER) setting menu
** DIRECTION (USER) 1 **
→PUSH SET
PAN/TILT
→PUSH SET
ZOOM/FOCUS
+
NORTH
RET DEL
AREA TITLE menu
AREA TITLE 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
POSI RET RESET
................
Display Position setting menu
FLOOR 1
NORTH