Panasonic WV-CS554 Operating Instructions Manual page 36

8. Move the cursor to FINE by using the joystick.
9. Use the joystick to match the vertical phase for both video output
signals as closely as possible.
Notes:
• When the "|" cursor reaches the "+" end, it jumps back to "–". At the same time, COARSE is
incremented by one step to enable a continuous adjustment. The reverse takes place when the
"|" cursor reaches the "–" end.
• When the joystick is kept to the right or left for more than one second, the "|" cursor moves quick-
ly.
• To reset COARSE and FINE to the values preset at the factory, press the F2 button of the WV-
CU550B. (For the WV-RM70, press the Left switch and Right switch simultaneously.) COARSE is
preset at the factory to zero-crossing of the AC line phase.
• If the AC line contains noise (spike noise, etc.), the stability of the vertical phase of the camera
video output signal may be disturbed.
8. White Balance Setting (WHITE BAL)
(1) Auto-Tracing White Balance Mode (ATW)
1. Display SET UP on the monitor screen.
(Refer to Setup Menu Display on page 14 for details on displaying
the SET UP menu on the monitor screen.)
2. Move the cursor to WHITE BAL and select ATW by using the joy-
stick. The white balance of the camera is automatically set.
3. For fine adjustment of the ATW, press the CAM (SET) key to dis-
play the ATW fine adjustment menu on the monitor screen.
4. Move the cursor to "R."
Use the joystick to obtain the optimum amount of red gain. The "I"
cursor moves to the left or right.
5. Move the cursor to "B."
Use the joystick to obtain the optimum amount of blue gain. The
"I" cursor moves to the left or right.
6. Move the cursor to RET by using the joystick and press the CAM
(SET) key to return to SET UP.
37
** SYNC **
V PHASE
COARSE 4(1--16)
FINE ••••••|••
- +
RET
** SYNC **
V PHASE
COARSE 1(1--16)
FINE •|•••••••
- +
RET
Camera setting menu
** SET UP **
CAMERA ID OFF
ALC/MANUAL ALC
SHUTTER ---
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
ATW fine adjustment menu
** ATW **
R ••••|••••
- +
B ••••|••••
- +
RET