Panasonic WV-CS554 Operating Instructions Manual page 26

Combination camera
Hide thumbs Also See for WV-CS554:
Table of Contents

Advertisement

Patrol (PATROL)
A routine of manual operations can be stored for up to 30 seconds
and later reproduced repetitively.
PATROL
1. For PATROL LEARN, set the following parameters for the starting
position. These parameters are stored when PATROL LEARN
mode begins.
• PAN/TILT/ZOOM/FOCUS settings
• IRIS setting
• SHUTTER setting
• AGC setting
• SENS UP setting
• WHITE BALANCE setting
After starting LEARN, the following manual operation are stored.
• PAN/TILT/ZOOM/FOCUS operation
• IRIS operation
• Preset position move
2. Open the SET UP menu and move the cursor to SPECIAL 1.
Select LEARN, PLAY or STOP for PATROL by moving the joystick
to the left or right.
LEARN: A series of manual operations is stored.
PLAY: Stored operations are reproduced.
STOP: LEARN or PLAY is not activated.
PATROL LEARN with a controller having PATROL key
1. Press the PATROL key and the CAM (SET) key simultaneously to
start PATROL LEARN. The setup menu changes to show "LEARN-
ING" and the starting point parameters are stored.
2. Operate manually. Operations data is stored.
3. To stop, press the PATROL STOP key.
PATROL LEARN with a controller not having PATROL key
1. Close the SET UP or SPECIAL 1 menu to start PATROL LEARN. Starting point parameters are stored
and "LEARNING" is displayed on the monitor.
2. Operate manually.
3. Open the SET UP menu to stop learning.
Notes:
• It is recommended that you set PAN LIMIT to ON for PATROL LEARN. Otherwise PAN LIMIT is
invalid for playback.
• Restart from the beginning if the power has failed during PATROL LEARN.
• LEARN also stops 30 seconds after the start, or if the memory is full.
• Auto refreshing may be activated during PATROL PLAY or AUTO MODE to calibrate the lens
position.
PATROL PLAY with a controller having PATROL key
1. Press the PATROL key. The camera turns to the starting point and the operations stored in the memo-
ry are reproduced. Iris operation only is accepted during playback.
2. Press the PATROL STOP key to stop playback or press any manual operation key (e.g., PAN/TILT/
ZOOM/FOCUS) except the iris keys.
27
SPECIAL1 menu
** SPECIAL1 **
PRIVACY ZONE
ON(ENB)
PROPO.P/T
OFF
AREA TITLE
ON
PATROL
PLAY
ALARM IN/OUT
PASSWORD LOCK
OFF
CLEANING
OFF
EL-ZOOM
ON
PRESET ALM
OFF
RET
Setup menu
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION
8
SELF RETURN
10MIN
AUTO MODE
OFF
AUTO PAN KEY
AUTO PAN
LOCAL/REMOTE
LOCAL
PATROL
STOP
CLEANING
OFF
CAMERA
PATROL LEARN
LEARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-cs854

Table of Contents