Panasonic WV-CS554 Operating Instructions Manual page 35

7. Synchronization Setting (SYNC)
1. Display SET UP on the monitor screen.
If necessary, refer to Setup Menu Display on page 14 for details
on displaying the SET UP menu on the monitor screen.
2. Move the cursor to SYNC and select line-lock (LL) or internal (INT)
by using the joystick.
Important Notice:
1. The priority of SYNC modes is as follows;
1. Multiplexed vertical drive (VD2) (highest priority)
2. Line-lock (LL)
3. Internal sync (INT) (lowest priority)
2. To use internal sync, select INT.
3. Whenever the vertical drive pulse (VD2) is supplied to the cam-
era, the camera sync mode is automatically switched to the multi-
plexed vertical drive (VD2) regardless which sync mode is select-
ed.
Line-lock Sync Mode (LL)
1. Display SET UP on the monitor screen.
(Refer to Setup Menu Display on page 14 for details on displaying
the SET UP menu on the monitor screen.)
2. Move the cursor to SYNC and select LL by using the joystick. LL
sync mode is not available when the multiplexed vertical drive
(VD2) pulse is supplied.
3. After selecting LL, press the CAM (SET) key.
The SYNC menu appears on the monitor screen.
4. Supply the video output signal of the camera to be adjusted and
the reference camera video output signal (for example, Camera 1)
to a dual-trace oscilloscope.
5. Set the dual-trace oscilloscope to the vertical rate and expand the
vertical sync portion on the oscilloscope.
6. Move the cursor to COARSE by using the joystick.
7. Use the joystick to match the vertical phases for both video output
signals as closely as possible. (COARSE adjustment can be incre-
mented in steps of 22.5 degrees (16 steps) with the joystick.)
Note: After the 16 steps, the adjustment returns to the first step.
36
1 (1 - - - 16): 0 degrees
2 (1 - - - 16): 22.5 degrees
16 (1 - - - 16): 337.5 degrees
Camera setting menu
** SET UP **
CAMERA ID OFF
ALC/MANUAL ALC
SHUTTER ---
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
Camera setting menu
** SET UP **
CAMERA ID ON
ALC/MANUAL ALC
SHUTTER ---
AGC ON
SENS UP OFF
SYNC LL
WHITE BAL ATW
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
SYNC menu
** SYNC **
V PHASE
COARSE 1(1--16)
FINE •|•••••••
- +
RET
** SYNC **
V PHASE
COARSE 1(1--16)
FINE •|•••••••
- +
RET