Panasonic WV-CS554 Operating Instructions Manual page 16

2. Press the CAM (SET) key to display the preset ID setting menu.
To enter a new PRESET ID
1. Move the cursor to the desired character using the joystick,
and press the CAM (SET) key.
2. The selected character appears in the editing area. (The
pointer in the editing area moves to the right automatically at
this moment.) To enter a blank, select SPACE.
3. Repeat the above procedure until all characters are entered.
To copy a preset ID from another position
1. Move the cursor to COPY and press the CAM (SET) key. The
preset ID in the immediately preceding position is shown.
Each consecutive pressing of the CAM (SET) key displays the
ID preceding the one currently displayed.
2. Display the most prospective ID.
3. Follow the step "To change an entered PRESET ID" if neces-
sary.
To change an entered PRESET ID
1. Move the pointer to the character to be edited in the editing
area by using the joystick, and press the CAM (SET) key.
2. Select a new character by using the joystick.
3. Press the CAM (SET) key to determine the PRESET ID.
To delete an entered PRESET ID
Move the cursor to RESET and press the CAM (SET) key.
17
Preset ID setting menu
Character Cursor
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
Character
NOPQRSTUVWXYZ
Area
().,'":;&#!?=
+-*/%$
SPACE
Command
COPY POSI RET RESET
DOOR............
Editing
Area
Pointer
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............