Omron E5C User Manual page 283

mav
• This parameter sets the number of inputs to include in the moving average. The data after
moving average processing is illustrated in the following figure.
Function
• Use a moving average to suppress rapid changes in the input.
Setting
*The default is 8 for models other than the E5@C-@-0@.
o-dp
This parameter is used to display the manipulated variable (MV).
The manipulated variable is displayed when the MV Monitor (Heating) and MV Monitor
(Cooling) parameters are set to ON, and not displayed when these parameters are set to
Function
OFF.
Setting
Related Parameters
See
See
MV Monitor (Heating) (Operation Level): Page 6-16
MV Monitor (Cooling) (Operation Level): Page 6-16
ret
• In the Operation Level, Adjustment Level, or Monitor/Setting Item Level, the display
automatically returns to the PV/SP if there are no key operations for the time set for this
parameter.
Function
• The automatic display return time is disabled when the parameter is set to OFF. (In that
case, the display will not be automatically switched.)
Setting
E5@C Digital Temperature Controllers User's Manual (H174)
Moving Average Count
Input data
Setting range
OFF, 2, 4, 8, 16, 32
MV Display
Setting range
on: Displayed, off: Not displayed
Automatic Display Return Time
Setting range
OFF, 1 to 99 Seconds
Operation result
Time
Unit Default
Times OFF*
A Standard Model must be used.
Default
off
Unit Default
off
6 Parameters
6
6 - 67