Omron E5C User Manual page 222

6 Parameters
pmsk
• This parameter turns the parameter mask function ON and OFF.
Function
on: Enabled, off: Disabled
Setting
* A parameter mask can be used to hide the displays of parameters that are not needed. The parameter mask
function is provided by the Setup Tool.
Setup Tool: CX-Thermo (EST2-2C-MV4)
prlp
This parameter is used to set the password to move to the Protect Level.
• To prevent setting the password incorrectly, the U and O Keys or D and O Keys must
be pressed simultaneously to set the password.
Function
Setting
Set this parameter to 0 when no password is to be set.
Related Parameters
See
See
Move to Protect Level (Protect Level): Page 6-3
Precautions for Correct Use
Protection cannot be cleared or changed without the password. Be careful not to forget it. If you
forget the password, contact your OMRON sales representative.
6 - 6
Parameter Mask Enable 000
Setting range
Password to Move to Protect Level
Setting range Default
−1999 to 9999
This parameter is displayed only when a parameter
mask has been set from the Setup Tool.
Default
on
000
0
E5@C Digital Temperature Controllers User's Manual (H174)