Toshiba RAS-M10PKVP-E Service Manual page 105

No. Part name
Compressor 1) Perform work of item 1 of a and b, c, d,
g
2) Extract refrigerant gas.
3) Remove the partition board.
4) Remove the sound-insulation material.
5) Remove terminal cover of the compressor,
6) Remove pipe connected to the compressor
7) Remove the fi xing screw of the bottom plate
8) Remove the fi xing screw of the bottom plate
9) Pull upward the refrigeration cycle.
10) Remove BOLT (3 pcs.) fi xing the compressor
Reactor 1) Perform work of item 1 of b, and c.
h
2) Remove screws fi xing the reactor.
Procedure
e.
(ST1TØ4 × 8L 3 pcs.)
and disconnect lead wire of the compressor
and the comp. thermo. assembly from the
terminal.
with a burner.
• Take care to keep the 4-way valve away
from naked fl ames.
(Otherwise, it may malfunction.)
and heat exchanger. (ST1TØ4 × 8L 1 pc.)
and valve fi xing plate.
(ST1TØ4 × 8L 1 pc.)
to the bottom plate.
* Precautions when assembling the
compressor.
Tighten the compressor bolts using a
tightening torque of 4.9 N•m.
(ST1TØ4 × 8L 4 pcs.)
Compressor
– 105 –
Remarks
Partition board
Valve
fixing
plate
Reactors