No.
Part name
Side cabinet 1. Side cabinet (right)
e
2. Side cabinet (left)
Fan motor
1) Perform work of item 1 of a and b.
f
2) Remove the fl ange nut fi xing the fan motor
3) Remove the propeller fan.
4) Disconnect the connector for fan motor from
5) Remove the fi xing screws (2 pc.) holding by
Procedure
1) Perform step 1 in b and all the steps in
c.
2) Remove the fi xing screw (ST1TØ4 × 8L
5 pcs.) used for securing the side cabinet
to the bottom plate and valve fi xing panel.
1) Perform step 1 in b.
2) Remove the fi xing screw (ST1TØ4 × 8L
1 pcs.) used to secure the side cabinet
(left) onto the heat exchanger.
3) Remove the fi xing screw (ST1TØ4 × 8L
2 pc.) used for securing the side cabinet to
the bottom plate and heat exchanger.
Detail A
and the propeller.
•
Flange nut is loosened by turning clockwise.
(To tighten the fl ange nut, turn
counterclockwise.)
the inverter.
hands so that the fan motor does not fall.
* Precautions when assembling the fan
motor.
Tighten the fl ange nut using a tightening
torque of 4.9 N•m.
Detail B
– 104 –
Remarks
A
B
C
Detail C
Propeller fan
Fan motor
Flange nut