Plotter Display Setup - Furuno GP-280 Operator's Manual

13.2 Plotter Display Setup

This section provides information for setting up the plotter display.
1. Press [MENU], [0], [2] to display the Plotter Display Standard menu.
Plotter Display Standard

Unit of Distance
Unit of Speed
Unit of Temp.
Unit of Depth
Direction
Mag. Variation
Scale
Pos. Disp. Meth.
Loran C Chain
Offset
Decca Chain
Offset
Loran A Chain
Offset

↑↓←→ : Sel, Fix
MENU : Esc
Unit of Distance: Selects unit of range measurement; nautical mile, statute mile and kilometer.
Unit of Speed: Selects unit of speed measurement; knot, statute mile/hour, kilometer/hour.
Unit of Temp.: Selects unit of water temperature measurement, °C (Celsius) or °F (Fahrenheit).
Unit of Depth: Selects unit of depth measurement; meters, feet, fathoms, hiro (Japanese),
passi-braza.
Direction: Ship's course and bearing to a waypoint may be shown in true or magnetic bearing.
Magnetic bearing is true bearing plus (or minus) earth's magnetic deviation. Select bearing
reference according to compass interfaced: magnetic for magnetic compass, true for
gyrocompass.
nm sm km
kt sm/h km/h
°C °F
m ft Fa Hiro PB
True Mag.
Auto [07.0°W] Man. (00.0°E)
Step Scale ←→
User-defined
Lat/Long
LC LOPs Decca LOPs LA LOPs
7980: 23-43
000.0 µs 000.0 µs
24: G-P [R: 1 G: 2 P: 3]
000.0 Lane 000.0 Lane
1L0-1L1 [L: 1 S: 2 H: 3]
000.0 µs 000.0 µs
13-17