Deleting Waypoints - Furuno GP-280 Operator's Manual

5.3 Deleting Waypoints

Waypoints can be deleted with the +cursor and through the waypoint list.
5.3.1 Deleting waypoints by the +cursor
1. Use the trackball to place the +cursor on the waypoint to delete.
2. Press the [CLR] key.
5.3.2 Deleting waypoints through the waypoint list
1. Press the [WPT ENTRY] key to display the waypoint list.
2. Press [↑] or [↓] to select waypoint.
3. Press the [CLR] key. The following message appears.
Are you sure to erase?
ENT : Erase
Other Keys : Escape
4. Press the [ENT] key. Position data of the waypoint selected is erased and replaced by " - -".
5. Press the [WPT ENTRY] key to close the waypoint list.
5-11